|
|
| |
|
|
Eco-Vent 2 (Titon HRV 2 Q Plus) |
|
Ventrite are pleased to announce the introduction of the TITON HRV Q Plus Range. |
|
|
|
Eco-Vent 2 (Titon HRV 2 Q Plus) |
For use in medium to large sized dwellings
The compact HRV2 Q Plus continuously running whole house ventilation unit with heat recovery is independently tested by the BRE and is EST Best Practice compliant. The HRV2 Q Plus MVHR unit gives cutting edge performance usually only associated with much larger and more costly products.
The combination of very low power consumption and a highly efficient heat exchanger is specifically designed to enhance SAP performance via Appendix Q, yet small enough to be easily incorporated into medium sized dwellings. The HRV2 Q Plus Mechanical Ventilation with Heat Recovery unit has many features and is available with a variety of options, including Summer Bypass, SUMMERboost® and Humidity Sensor.
Features & Benefits
- Compact unit can be fitted in cupboards or loft spaces
- Very low power consumption / specific fan power
- Constant volume fans
- Highly efficient heat exchanger; up to 90%
- Four versions available, two of which are compatible with auralite® status indicator
- Standard version has a Summer Mode feature to help reduce dwelling overheating
- Intelligent controller, quick and easy to commission
- Fully adjustable boost overrun timer 0-60 minutes; can be used with non-latching (momentary) switches to prevent unit from being accidently left in boost mode
- Accepts 125mm or 150mm diameter ducting, no adaptors required
- Intelligent frost protection, stepped reduction of supply air rates prevents freezing
- Setback setting to reduce ventilation where local regulations allow
- Lightweight for easy handling
- Demand Control Ventilation ready
- Volt free switching control
- G3 filters as standard, G4 as an option. F7 on request, more information available here
- Re-usable plastic filter frames
- Quick fix via mounting bracket
- Patented
|
 |
|
Eco-Vent 1 (Titon HRV2 Q Plus) Brochure PDF Please
Click Here |
|
|
|
To find out how our system works please click here. |
Explanation of Features
- Setback - Provides a reduced ventilation rate for dwellings that are unoccupied for a long period.
- Normal - Continuously running extract and supply, set on install in accordance with the requirements of the applicable Regulations.
- Boost - Increases ventilation rates on demand, set on install in accordance with the requirementsof the applicable Regulations.
- Summer Mode - Turns off the supply air on demand or via a remote thermostat. (Additional controllable passive ventilation may be required).
- Summer Bypass - Automatically controlled, bypasses the heat exchanger when indoor/outdoor temperature conditions make heat exchange undesirable.
- SUMMERboost - Only available with summer bypass models, when selected, this increases both the supply and extract to full speed when the automatic bypass engages.
- Duct Heater Control - used for the automatic control of in-line duct heaters to maintain ventilation rates and prevent heat cell freezing.
- Integrated Humidity Sensor - continously monitors the relative humidity of the extracted air and triggers Boost Speed when it rises over a set threshold.
|
 (Click link to titon UK web site)
|
WOODMAN HARDWARE & SOFTWARE LTD. |
